在圆角管的生产过程中，工人与钢渣、钢水及火焰接触的机会多，发生灼伤烧伤的危险性较大。特别是在机械化不够、体力劳动较多的情况下，如出渣、加料、打开出钢口和浇铸钢锭的过程中最易发生烧伤。最有效的防止烧伤的办法是实行机械化操作，同时加强个人防护。
In the production process of round corner pipe, workers have more opportunities to contact with steel slag, molten steel and flame, and the risk of burning is greater. Especially in the case of insufficient mechanization and more manual labor, burns are most likely to occur in the process of slag discharge, feeding, opening tap and ingot casting. The most effective way to prevent burns is to carry out mechanized operation while strengthening personal protection. 圆角管生产中可能引起煤气爆炸及钢水爆炸事故。加料时，要禁止加湿料，注意原材料内是否有。煤气管道应保持正常压力，盛钢水的钢水罐要烘干，地面不可有水或过于潮湿。
Gas explosion and molten steel explosion may occur in the production of round corner pipe. When feeding, moisturizing materials should be prohibited, and attention should be paid to whether there is any in the raw materials. The gas pipeline should maintain normal pressure, the steel tank for holding molten steel should be dried, and the ground should not be watery or too wet.
